The production of domestic hot water (DHW) takes place via a plate heat exchanger powered by the hot water produced by the heat pump. The accumulation of hot water in the storage allows a considerable amount of hot water to meet the demands concentrated in certain time slots of the day. The recovery of hot water in the storage takes place quickly thanks to the heat exchanger. The DHW delivery temperature is controlled by an electronic mixing valve, and it is also possible to install the hot water feed-back loops in the Aquaskid® Eletric in order to have water immediately warm even at the farthest taps.
By connecting appropriate solar panels, the Aquaskids can use the free energy from the sun thereby greatly reducing gas and/or electricity consumption. It’s also possible connect energy recovering systems from refrigeration or multifunctional units dedicated to air conditioning, thus recovering free heat that would otherwise be lost in the environment.
EMS optimizes the functioning of Aquaskid-Electric with an appropriate management of production and storage temperatures, heating water only when needed by exploiting the stratification of water according to its temperature, and by where available incorporating renewable energy sources.
ACS – Electric | |
---|---|
Generatore di calore | Pompa di calore |
Potenza generatore ausiliario | Resistenza elettrica |
Potenza generatore primario (pompa di calore) | Da 35 kWt a 120 kWt |
Potenza generatore ausiliario (resistenza elettrica) | Da 5kW a 20 kW |
Volume di accumulo sanitario | Da 500 litri a 2000 litri |
Portata di progetto ACS | Da 80 l/min a 300 l/min |
Produzione di ACS nella prima ora Booster Mode (∆T = 25°C) | Da 2600 litri a 5500 litri |
Produzione di ACS nella prima ora Saving Mode (∆T = 25°C) | Da 2100 litri a 4500 litri |
Predisposizione solare termico | Disponibile |
Predisposizione ricircolo sanitario | Disponibile |
Temperatura max di esercizio | 60°C |
Temperatura max di ACS | 60°C |
Pressione max circuito ACS | 5 bar |
Dimensioni HxLxP (mm) | Da 1850x1650x1100 a 2350x1850x1250 |
Connessioni acqua ingresso | Da 1” a 2”1/2 |
Connessioni ACS | Da 1” a 2”1/2 |
Connessioni acqua ricircolo | 3/4″ |
Connessioni solare termico | 3/4″ |
Materiale tubazioni | Rame e inox |
Alimentazione elettrica | 230V/400V 50Hz |
Assorbimento elettrico | Da 11 kWe a 65 kWe |
Peso a vuoto | Da 600 kg a 800 kg |
Adsum si riserva il diritto di modificare i dati della presente scheda tecnica in qualsiasi momento.